In real lifeGreen wire mesh immersion molding is a rust prevention treatment performance. , iron wire or galvanized wire can be exposed to long-term sunlight, especially in the near future when rainwater will rust or even rot. Therefore, wire mesh is made of iron wire. Generally, when purchasing wire mesh products, it is hoped that it can be used for a longer time. According to customer needs, a layer of surface treatment will be done to prevent the wire mesh from long-term rust, We refer to this treatment method as impregnation molding.
Green wire mesh impregnated fences can generally be kept rust free in ordinary environments for 10-20 years, fences with a diameter below 400 wires can generally be kept for 8-10 years, and 550 wire products can generally be kept for 15-26 years.
The two commonly used forms of green wire mesh, impregnation and spraying, can be seen literally. In fact, there are many differences in process. The impregnation products are based on steel, and the entire material is usually immersed in iron solute. The processing fence is acid and alkali resistant, has advantages such as moisture resistance, long service life, and so on.
Green wire mesh impregnation molding is applied in multiple fields such as large-scale high-speed fence mesh, railway fence mesh, garden protective mesh, and civil anti-theft mesh. Compared to impregnation molding, the spray molding process is mainly made by spraying thermoplastic powder coatings, commonly used as surface coatings are some polyethylene and polytetrachloroethylene. This means that these materials are suitable for indoor buildings, such as indoor flower exhibitions, indoor sports isolation nets, etc.
